Cleaning the printer pickup roller
If you want to clean the pickup roller rather than replace it, follow the instructions below:
2
Remove the pickup roller as described in steps 1 through 5 of �Replacing the printer pickup roller� on page 41. 1 Dampen a lint-free cloth in isopropyl alcohol, and scrub the roller.
3
WARNING! Alcohol is flammable. Keep the alcohol and cloth away from an open flame. Before you close the printer and plug in the power cord, allow the alcohol to dry completely. 2 Using a dry, lint-free cloth, wipe the pickup roller to remove loosened dirt. Allow the pickup roller to dry completely before you reinstall it in the printer. To reinstall the pickup roller, see steps 6 through 9 of "Replacing the printer pickup roller" on page 42.
